 | |
Apollo 2010
Plastic BonderEster Base: EthylViscosity: 100Color: ClearSet Time* (Metal/Rubber/Plastic): 20 - 5 - 7Strength PSI (Steel:Steel Tensile Shear): 3200Temperature Range: -65o to 200o F* Set Time is Approximate. Results will vary with temperature, climate, and relative humidity.
 View Technical Data Sheet
View Material Safety Data Sheet
|
|
|
 | |
Cybercryl 800
Color: Milky WhiteMix Ratio: 1:1Mixed Viscosity: 280,000Open Time: 5-6 min.Fixture Time: 9-10 min.Operating Temp: -40 to 250 FTypical Tensile Shear Strength psi(5) Al: 3000Steel: 4500Fiberglass: SFPMMA: SFSMC: SFABS: SFPVC: SFSF = Substrate Failure
View Technical Data Sheet
View Material Safety Data Sheet
|
|
|
| |
Cybercryl 805
Color: Milky WhiteMix Ratio: 1:1Mixed Viscosity: 280,000Open Time: 10-12 min.Fixture Time: 18-20 min.Operating Temp: -40 to 250 FTypical Tensile Shear Strength psi(5) Al: 3300Steel: 4500Fiberglass: SFPMMA: SFSMC: SFABS: SFPVC: SFSF = Substrate Failure
View Technical Data Sheet
View Material Safety Data Sheet
|
|
|
| |
Cybercryl 806
Color: Off WhiteMix Ratio: 1:1Mixed Viscosity: 200,000Open Time: 5 min.Fixture Time: 10-12 min.Operating Temp: -60 to 250 FTypical Tensile Shear Strength psi(5) Al: 3400-3700Steel: 3100-3400Fiberglass: SFPMMA: SFSMC: SFABS: SFPVC: SFSF = Substrate Failure
View Technical Data Sheet
View Material Safety Data Sheet
|
|
|
|
|
|
|
 | |
Cyberpoxy 5030
Clear2 Part1 to 1 mixing ratio Gel Time = 30 minutes in 100gm preparation- Develops handling strength in about 30 to 45 minutes and will cure rapidly in thin films at low temperatures- Will readily bond most plastics, metals, ceramics, paper, wood and some rubbers- Ideally suited to applications in electronics, and general product assembly
View Technical Data Sheet
View Material Safety Data Sheet
|
|
|
 | |
Dualbond 777
Yellow milkyHigh viscosity - ThixotropicExcellent for bonding glass, metal, and plasticCan be used for coating and sealing electronic componentsShadow areas can be cured by heat
View Technical Data Sheet
|
|
|
)
)
)
)
)
)
